![]() ![]() Pairing mode is indicated by the status LED flashing red/green/orange. Once the Audioserver is operational and connected to the network, it can be paired with the Miniserver in Loxone Config. Then follow the instructions for pairing with the Miniserver. This is indicated by the status LED flashing red/green/orange. After this initial set-up, the Audioserver is ready for pairing with the Miniserver. Wait until the Audioserver has completed the startup process. When starting for the first time, the file system on the SD card is unpacked, during this process the status LEDs remain off. The Audioserver starts after switching on the power supply and is ready for operation after about 1.5 minutes. The wiring examples provide a brief overview. Connect the Stereo Extensions to the Tree Turbo interface. The LAN port is used to connect the Audioserver to the local network or a WiFi router. The Miniserver is installed on a DIN rail in a suitable enclosure.Ĭonnect the power supply, the speakers and audio in/outputs as needed. The Audioserver is compatible with every type of the Loxone Miniserver. ![]() Each speaker output can be configured to output either the left or right channel signal, or a downmix of both channels. It is possible to create groups across rooms, allowing for a uniform music experience in open spaces.įor larger rooms, multiple speaker outputs are assigned to the same Audio Player function block. Using the Audio Player function block in Loxone Config, the system can be highly customized, the speaker outputs can be assigned to the individual rooms in mono or stereo mode. For larger systems, multiple Audioservers can be used. Using the Tree Turbo interface, every Audioserver can be expanded with up to 10 Stereo Extensions for additional zones or speaker outputs. An analogue audio input, an output and a digital (electrical) SPDIF output (all via 3.5mm jacks) are also integrated. The Audioserver provides two stereo speaker outputs, which can also be separated and used individually. The USB interface can be used to connect storage devices with music files. The LAN interface is used to connect to the Miniserver, and to stream radio stations or music services on the Internet, or media on the local network. The replaceable microSD card contains the operating system and settings. The doorbell, notifications and announcements as well as alarms are also enabled in this way. In combination with the Miniserver, it is possible to play different music for each room and to select from a various audio sources. The Loxone Audioserver is a highly versatile audio solution for any type of building. Note: When using more than one Audioserver, network failures may occur since firmware 2.6 due to reboots on Huawei routers. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |